Product Code Database
A button cell, watch battery, or coin battery is a small battery made of a single electrochemical cell and shaped as a squat cylinder typically in diameter and high – resembling a button. Stainless steel usually forms the bottom body and Electric charge terminal of the cell; insulated from it, the metallic top cap forms the Electric charge terminal.
Button cells are used to power small portable electronics devices such as , pocket calculators, and remote key fobs. Wider variants are usually called coin cells. Devices using button cells are usually designed around a cell giving a long service life, typically well over a year in continuous use in a wristwatch. Most button cells have low self-discharge, holding their charge for a long time if not used.
Button cells are usually disposable , but some are rechargeable secondary cells. Common chemistries include zinc, lithium, manganese dioxide, and silver oxide. Mercury battery button cells were formerly common, but are no longer available due to the toxicity and environmental effects of mercury.
Button cells are dangerous for small children, as when swallowed they can cause severe internal burns and significant injury or death. Duracell has attempted to mitigate this by adding a Bitterant to their batteries.
Alkaline battery are made in the same button sizes as the other types, but typically provide less capacity and less stable voltage than more costly silver oxide or lithium cells. Alkaline button cell. amazon.co.uk. A card marked with the name Hyundai with 30 button cells in 5 sizes made in China, stating that they are alkaline but with pictures of watches, calculators, etc. is sold for prices ranging from about £1 to £4 in the UK
Silver cells may have an output voltage that is stable until it suddenly drops at end of life. This varies for individual types; one manufacturer (Energizer) offers three silver oxide cells of the same size, 357–303, 357-303H and EPX76, with capacities ranging from 150 to 200 Ampere hour, voltage characteristics ranging from gradually reducing to fairly constant, and some stated to be for continuous low drain with high pulse on demand, others for photo use.
Mercury battery also supply a stable voltage, but are banned in many countries due to their toxicity and environmental impact.
Zinc-air battery use air as the depolarizer and have much higher capacity than other types, as they take that air from the atmosphere. Cells have an air-tight seal which must be removed before use; they will then dry out in a few weeks, regardless of use.
For comparison, the properties of some cells from one manufacturer with diameter 11.6 mm and height 5.4 mm were listed in 2009 as: Energizer website , with datasheets for many batteries of several chemistries
Examining datasheets for a manufacturer's range may show a high-capacity alkaline cell with a capacity as high as one of the lower-capacity silver types; or a particular silver cell with twice the capacity of a particular alkaline cell. If the powered equipment requires a relatively high voltage (e.g., 1.3 V) to operate correctly, a silver cell with a flat discharge characteristic will give much longer service than an alkaline cell—even if it has the same specified capacity in mAh to an end-point of 0.9 V. If a device seems to "eat up" batteries after the original supplied by the manufacturer is replaced, it may be useful to check the device's requirements and the replacement battery's characteristics. For digital calipers, in particular, some are specified to require at least 1.25 V to operate and others 1.38 V. Buying Button Cells for Digital Calipers . Truetex.com. Retrieved on 2015-11-08. Caliper Battery Life . Davehylands.com. Retrieved on 2015-11-08.
While alkaline, silver oxide, and mercury batteries of the same size may be mechanically interchangeable in any given device, use of a cell of the right voltage but unsuitable characteristics can lead to short battery life or failure to operate equipment. Common Lithium battery primary cells, with a terminal voltage around 3 volts, are not made in sizes interchangeable with 1.5 volt cells. Use of a battery of significantly higher voltage than equipment is designed for can cause permanent damage.
Examples of batteries conforming to the IEC standard are CR2032, SR516, and LR1154, where the letters and numbers indicate the following characteristics.
For types with stable voltage falling precipitously at end-of-life (cliff-top voltage-versus-time graph), the end-voltage is the value at the "cliff-edge", after which the voltage drops extremely rapidly. For types which lose voltage gradually (slope graph, no cliff-edge), the end-point is the voltage beyond which further discharge will cause damage to the battery and possibly the device it is powering, typically 1.0 or 0.9 V.
Common names are conventional rather than uniquely descriptive; for example, a silver (oxide) cell has an alkaline electrolyte.
L, S, and C type cells are today the most commonly used types in , , small PDA devices, computer clocks, and blinky lights. Miniature zinc-air battery – P type – are used in and medical instruments. In the IEC system, larger cells may have no prefix for the chemical system, indicating they are zinc-carbon batteries; such types are not available in button cell format.
The second letter, R, indicates a round (cylindrical) form.
The standard only describes primary batteries. Rechargeable types made in the same case size will carry a different prefix not given in the IEC standard, for example some ML and LiR button cells use rechargeable lithium technology.
For rechargeables, the IEC prefixes are: Battery Standards and Sizes. (2005). Batteries for Portable Devices, 29–32. doi:10.1016/b978-044451672-5/50003-x
Examples:
Some coin cells, particularly lithium, are made with solder tabs for permanent installation, such as to power memory for configuration information of a device. The complete nomenclature will have prefixes and suffixes to indicate special terminal arrangements. For example, there is a plug-in and a solder-in CR2032, a plug-in and three solder-in BR2330s in addition to CR2330s, and many rechargeables in 2032, 2330, and other sizes. Panasonic CR battery data page , showing many batteries in plug-in and horizontal and vertical solder versions. The same site lists rechargeable cells with various chemistries, in the same sizes and options as disposable batteries of the same size code and hence mechanically interchangeable, though carrying risks of malfunctioning and damage.
There is no universal standard.
The manufacturing date can be abbreviated to the last digit of the year, followed by a digit or letter indicating the month, where O, Y, and Z are used for October, November and December, respectively (e.g., 01 = January 2010 or 2000, 9Y = November 2019 or 2009).
A typical use for a small rechargeable battery (in coin or other format) is to back up the settings of equipment which is normally permanently mains-powered, in the case of power failure. For example, many central heating controllers store operation times and similar information in volatile memory, lost in the case of power failure. It is usual for such systems to include a backup battery, either a disposable in a holder (current drain is extremely low and life is long) or a soldered-in rechargeable. Datasheet of a mains-powered smoke alarm, with models backed up by disposable battery or by rechargeable UL2330 button battery . Kiddefirex.co.uk (2015-10-01). Retrieved on 2015-11-08.
Rechargeable NiCd button cells were often components of the backup battery of older computers; non-rechargeable lithium button cells with a lifetime of several years are used in later equipment.
Rechargeable batteries typically have the same dimension-based numeric code with different letters; thus CR2032 is a disposable battery while ML2032, VL2032 and LIR2032 are rechargeables that fit in the same holder if not fitted with solder tags. It is mechanically possible, though hazardous, to fit a disposable battery in a holder intended for a rechargeable; holders are fitted in parts of equipment only accessible by service personnel in such cases.
Swallowed batteries can cause damage to the lining of the esophagus, and can create a hole in the esophagus lining in two hours. In severe cases, damage can cause a passage between the esophagus and the trachea. Swallowed button cells can damage the vocal cords. They can even burn through the blood vessels in the chest area, including the aorta. In the United States, 44 child deaths were reported from button battery ingestion in 2002–2021. Ingestions are treated initially with honey or sucralfate as a temporizing measure, with Endoscopy as definitive treatment.
In Greater Manchester, England, with a population of 2,700,000, two children between 12 months and six years old died, and five suffered life-changing injuries, in the 18 months leading up to October 2014. In the United States, on average, over 3,000 pediatric ingestions of button batteries are reported annually. The proportion of major and fatal outcomes is increasing. Coin cells of diameter 20 mm or greater cause the most serious injuries, even if expended and intact. In Auckland, New Zealand as of 2018 there are about 20 cases per year requiring hospitalization.
In 2020, Duracell announced that they were coating some of their lithium button cells with a bitterant compound to discourage children from ingesting them. An alternative solution is to design (or litigate) the offending cells, mostly 20mm lithium cells, out of the supply chain.Paull, John (2021). Button batteries and child deaths: Market failure of unsafe products, International Journal of Clinical and Experimental Medicine Research, 2021, 5(3), 297–303
Children most at risk of button battery ingestion are those aged 5 years and under. Three child deaths in Australia reveal that in each case: i) the ingestion was not witnessed, ii) the source of the battery remains unknown, iii) initial misdiagnosis delayed appropriate intervention, iv) diagnosis was confirmed by X-ray, v) in each case the battery lodged in the child's oesophagus, vi) the offending batteries were 20mm lithium cells, vii) death occurred 19 days to 3 weeks after ingestion. The presenting symptoms of button cell ingestion may be misdiagnosed and attributed to common non life-threatening childhood maladies.
Type designation
International standard IEC 60086-3 defines an alphanumeric coding system for "Watch batteries". Manufacturers often have their own naming system; for example, the cell called LR1154 by the IEC standard is named AG13, LR44, 357, A76, and other names by different manufacturers. The IEC standard and some others encode the case size so that the numeric part of the code is uniquely determined by the case size; other codes do not encode size directly.
Electrochemical system
The first letter in the IEC standard system identifies the chemical composition of the battery, which also implies a nominal voltage:
Much higher capacity than zinc-carbon. SR synonymous to AG. Much flatter discharge curve than L. Slightly higher nominal capacity, much higher effective capacity for devices with higher cutoff voltage (eg. digital calipers). High capacity. Activated by removing seal from vent. Electrolyte can dry out. Very common. Gradual loss of voltage with discharge. Similar to C, with better performance and lower self-discharge at higher temperatures; lower initial voltage, flatter discharge curve. Low temperature, high capacity ?
sometimes called "rechargeable CR"; higher voltage than CR can cause damage when used as direct replacement, may be lowered with a serial diode or regulator "manganese"; -20..+60 °C, 2.8..3.2V charging; common for long-term memory/realtime clock backups; plateaus at 2.5V "manganese silicon"; -20..+60 °C, 2.8..3.3V charging; better charge/discharge characteristics than VL or ML; common for memory/RTC backups "vanadium", eg, VL1220, VL2020, VL2330, VL3032; -20..+60 °C, 3.25..3.55V charging; lower voltage drop on load "cobalt titanium"; -20..+60 °C, 2.5..2.7V charging; common in solar watches, sometimes called "watch capacitor" "manganese titanium"; -10..+60 °C, 1.8..2.6V charging can replace LR/SR cells if lower voltage than 1.5V is not a problem "thionyl chloride"; for low temperatures
Package size
The package size of button batteries can be indicated by a 2-digit code representing a standard case size, or a 3- or 4-digit code representing the cell diameter and height, where the first one or two digits encode the outer diameter of the battery in whole millimeters, rounded down. Exact diameters are specified by the standard, and there is no ambiguity; e.g., any cell with an initial 9 is 9.5 mm in diameter, since no other value between 9.0 and 9.9 is used. The last two digits are the overall height in tenths of a millimeter.
+ Diameter code (first 1 or 2 digits)
! Number
code
! Nominal
diameter (mm)
! Tolerance (mm)±0.15 ±0.15 ±0.15 ±0.15 ±0.15 ±0.20 ±0.20 ±0.25 ±0.25 ±0.25 ±0.50 ±0.50 ±0.20
Letter suffix
After the package code, the following additional letters may optionally appear in the type designation to indicate the electrolyte used:
Other package markings
Apart from the type code described in the preceding section, watch batteries should also be marked with
Date codes
Often a 2-letter code (sometimes on the side of the battery) where the first letter identifies the manufacturer and the second is the year of manufacture. For example:
Common manufacturer code
A code used by some manufacturers is AG (alkaline) or SG (silver) followed by a number, as follows
To those familiar with the chemical symbol for silver, Ag, this may suggest incorrectly that AG cells are silver.
521 621 726 736 626 754 920 or 921 926 or 927 1120 or 1121 936 1130 or 1131 721 1142 1154
Rechargeable variants
addition to disposable (single use) button cells, rechargeable batteries in many of the same sizes are available, with lower capacity than disposable cells. Disposable and rechargeable batteries are manufactured to fit into a holder or with solder tags for permanent connection. In equipment with a battery holder, disposable or rechargeable batteries may be used, if the voltage is compatible.
Health issues
Accidental ingestion
Button cells are attractive to small children; they may put them in their mouth and swallow them. The ingested battery can cause significant damage to internal organs. The battery reacts with bodily fluids, such as mucus or saliva, creating a circuit which can release an alkali that is strong enough to burn through human tissue.Paull, John (2022) Silent Nursery: Button Battery Fatalities in Children – the Long Road from Externality to Obsolescence, International Journal of Clinical and Experimental Medicine Research, 6 (3): 301–308.
Mercury and cadmium
Some button cells contain mercury or cadmium, which are toxic. In early 2013 the European Parliament Environment Committee voted for a ban on the export and import of a range of mercury-containing products such as button cells and other batteries, to be imposed from 2020.148 Kb "Directive 2013/56/EU amending Directive 2006/66/EC" , European Parliament & Council, 20 November 2013, Retrieved 7 April 2015
See also
Sources
External links
|
|
